- About Us
- Offerings
- Responsibility
Responsibility
- Investors
- Careers
- Media
Media
- Contact Us
Waterproofing
SmartBlok PU 2K INJECT GROUT is a two component solvent free, polyurethane system consisting of a resin component (SmartBlok PU 2k Inject Grout) and a special type of isocyanate (SmartBlok PU 2K Inject Grout)
This system is ideally suitable for the elastic sealing of cracks in concrete surfaces as well as areas suffering from water leakage problems.
The use of SmartBlok PU 2K Inject Grout as such is depending on the amount of water expected. In case the crack is dry or moist, the resin can be used directly into the crack.
Repair concete cracks for water-stop
Deeper penetration
Low VOC content
Reduced Odor
| Properties | Part A | Part B |
|---|---|---|
| Colour | Yellowish | Dark Brown |
| Density (g/cc) | 1.040 ± 0.02 | 1.220 ± 0.02 |
| Mixed Viscosity of the mixture at 300C mPas | 250 - 600 cps | 250 - 600 cps |
| Mixing Ratio by volume | 2 | 1 |
| Potlife at 200C(minutes) | 150 minutes | 150 minutes |
| Shore Hardness | 40 A | 40 A |
| Mixed Density(g/cc) | 1.078 | 1.078 |
Our Subsidiary -
cement
JSW Cement. Copyright 2022 - All rights reserved.
